...on projectors. An M1 cable can also be used to power accessories, such as interface cards for PDAs. • There are three primary types of M1 connectors: • M1-DA (digital and analog) • this is the most common connector, and it supports VGA, USB and D...

...data or optical fiber cable. It provides compatibility with existing 10BASE-T systems and thus enables plug-and-play upgrades from 10BASE-T. Fast Ethernet is sometimes referred to as 100BASE-X where X is a placeholder for the FX and TX variants • ...

...Distance • Wavelength • Cable • 10GBASE-SR • 300 m • 850 nm • Multimode • 10GBASE-SW • 300 m • 850 nm • Multimode • 10GBASE-LR • 10 km • 1310 nm • Single-Mode • 10GBASE-LW • 10 km • 1310 nm • Single-Mode • 10GBASE-LX4 • Multimode 300 m / • Single-Mo...

...of connectors. • The cable • The USB 3.0 cable contains nine wires, four more than USB 2.0, which has one pair for data and one pair for power. USB 3.0 adds two more data pairs, for a total of eight plus a ground. These extra pairs enable USB 3.0...

...is always useful for cable management. • Rails. • A main cabinet component is one or two pairs of vertical rails with mounting holes to which you attach your equipment or shelves. The most common spacing between rails is 19 inches with hole-to-ho...

...Uses “Thin“ coax cable (RG58A/U or RG58C/U). • The maximum length of one segment is 185 metres. • The maximum number of segments is five. • The maximum total length of all segments is 925 metres. • The minimum distance between T-connectors is...

...connectors. • USB 3.0 cable contains nine wires, four more than USB 2.0, which has one pair for data and one pair for power. USB 3.0 adds two more data pairs, for a total of eight plus a ground. These extra pairs enable USB 3.0 to support bidirect...