Hardened Power-over-Line (PoL) PoE Ethernet Extender Kit

The Hardened PoL PoE Ethernet Extender Kit connects and powers PoE devices such as security cameras over one pair of ordinary voice-grade UTP cable. It enables you to save on installation costs by enabling you to use wire you may already have installed.

Speed, distance, and power!
This extender delivers the goods with up to 100-Mbps performance at up to 300 meters. Plus, even at a distance of almost three football fields, it powers 802.3at PoE devices with a full 30 watts, so high-powered devices like PTZ cameras can get the power they require. At longer distances, speed and power go down, of course, but you can still get full power by using a separate power supply with the remote unit (see the chart below).

Built tough for tough environments
The extender is hardened for industrial use with a tough aluminum case that keeps out dust and debris. It features an extended temperature range of -40 to 75° C. The extender mounts on standard DIN rails and accepts standard 48-VDC power via terminal block. For redundant power, the terminal block has a second power input or you can use the 48-VDC power jack.

Distance/Speed/Power with Power over Link (PoL) Enabled:
Distance - Data Rate - PoE Output
300 m (984 ft.) - 100 Mbps - 30 watts
400 m (1312 ft.) - 90 Mbps - 15.4 watts
600 m (1968 ft.) - 60 Mbps - 14 watts
800 m (2624 ft.) - 45 Mbps - 9.5 watts
1 km (3280 ft.) - 35 Mbps - 7 watts
1.2 km (3937 ft.) - 20 Mbps- 5 watts


Distance/Speed/Power with Power over Link (PoL) Disabled:
(power supply on remote unit)
Distance - Speed - PoE Output
1.4 km (0.8 mi.) - 15 Mbps - 30 watts
1.6 km (1 mi.) - 10 Mbps - 30 watts
1.8 km (1.1 mi.) - 3 Mbps - 30 watts
Up to 2.2 km (1.4 mi.) - 1 Mbps - 30 watts

Environmental —
Operating temperature: -40 to 75° C (-40 to +167° F);
Storage temperature: -40 to 85° C (-40 to +185° F);
Humidity: 5–95%, noncondensing
Connectors —
Network: (1) 10-/100-Mbps RJ-45;
Line: (1) RJ-11,
(1) 2-pin terminal block;
Power: (1) DC terminal block with support for redundant power; (1) DC power jack
Indicators —
Local unit: (3) Power, (1) PoL, (1) LAN, (5) Line Speed, (1) Link;
Remote unit: (3) Power, (1) PoL, (1) LAN, (5) Line Speed, (1) Link, (3) PSE output
Power —
Input: 46–57-VDC terminal block or 48-VDC jack, power supply sold separately (SDR-120-48);
Output: Click on “Details” tab for Distance/Speed/Power chart
Dimensions — Each unit: 13.5 x 5 x 11 cm (5.3"H x 2"W x 4.3"D)

NOTE: The LBPS310A-KIT does not come with a power supply. Order the DIN Rail Power Supply, 120 Watts, 48 VDC (SDR-120-48) separately.